德国罗博特（RBT）进口分布直动式电磁阀

进口分布直动式电磁阀

Dislrihutinn of rlirnct aclinn snlennirl valve

〖产品说明〗

德国罗博特（RBT）品牌：进口分布直动式电磁阀体型小，外观精美；线圈通电直接启动阀芯，阀关闭靠弹簧复位；零压启动；泄漏量零；专制线圈，不易烧毁；阀体安装方向无限制。German Robert RBT import distribution of direct type solenoid valve body is small, the appearance is exquisite; coil power directly start valve, the valve closed by the spring reset; zero pressure start; leakage zero; the absolute coil, not easy to burn; valve installation direction without restrictions.

【产品特点】

零压启动、低压结合；活塞结构、性能稳定；专制线圈，不易烧毁；适用于低压力、大口径的管道系统中安装需垂直安装。

Product features: zero voltage starting，low pressure combination, piston structure absolute coil，is not easy to be burned，suitable for low pressure，large diameter pipe system，Installation for vertical mounting。

【主趁技术参数】

规格尺寸：DN15-DN200mm

控制方式：常开、常闭、自保持式。

电源电压：DC12^220V、AC24^38DV。

阀体材质：铸钢、不锈钢。

适用介质：水、气、油、腐蚀流体等。

压力范围：0-0.6MPa。

温度范围：(-20℃≈200℃)。

介质粘度：小于50℃ St(大于时需定制)。

防护性能：防尘、防水、防爆。根据工况选择。

接线方式：接线座式、引线式、插头式。

连接方式：法兰、焊接、内螺纹(外螺纹和特殊接口可定做或加转接头)。

Main technical parameters:

Size: DN15-DN200mm

Control mode: normally open, normally closed, self-retaining.

The power supply voltage: DC12, 220V; AC24-380V

The valve body material: Cast steel, stainless steel

Applicable medium: water、oil、gas、corrosive fluid.

Pressurerange:0-0.6MPa

The pressure range: detailed in the table below

Temperature range:(-20℃+200℃)

Tho viscosity of the medium less than 50℃ St(morn than required custom)

The protective performance of dustprool，waterproofi，explosion-proof According Eo the working condition

The connection: connection seat type: lead: plug type

The connection: flange, welding, internal thread(thread and special

The interface can be customized or adapter).

【应用范围】

石化、电力、机械、医疗、科研、灌装、楼宇、工业窑炉、管道介质自动化控制等领域。

Scope of application，petrochemical，electric power machinery medical，scientific research，irrigation，Equipment，buildings，industrial furnace, the medium in the pipeline automatic control and other fields。

【注解 Note】

流体中若含有杂质，电磁阀进端必须安装过滤器，二进一出的工作原理的电磁阀两进口端压力不相等时，需加止回阀。可安装止回阀或订制自带止回功能的阀门。

if the fluid contains impurities,solenoid valve into the end must be installed in the filter,two into a working principle of the solenoid valve two inlet end pressure is not equal,the need to add check valve.Can be installed check valve or custom comes with a return function of the valve.

德国罗博特RBT阀门集团有限公司中国总代理(上海波昂一级代理商)