斯派莎克气动牛角阀

英国斯派莎克PF61G角座阀、斯派莎克角座阀价格

    斯派莎克开/关式气动活塞角座阀PF61G/PF51G系列，结实耐用，设计紧凑，本体为316L不锈钢/铜。使用PTFE阀头密封确保紧密关闭。自校正的PTFT'V'型阀杆密封提供了最好的密封效果:

    不锈钢阀体的气动活塞角阀还可提供对焊、法兰和卫生卡箍等连接方式。其中PF62G对焊连接，PF63G法兰连接，(EN1092  PIN或ANSI 150法兰)，PF64G承接焊连接，FF65G, ISO2852卫生卡箍连接。

    提供常开和常闭以及用于双向流动防水锤的特殊型号。有三种不同尺寸的执行器用丁不同的应用。其他可供选择包括:流量调节器，电感行程开关，直接安装的电磁导阀。

    本系列角阀具有广泛的适用性，使用介质包括蒸汽，空气中性气体。最高使用范围可达20brad，180℃。.为设备制造商(OEM)和直接用户提供了理想的开关控制方法。

英国斯派莎克气动角座阀PM6，是设计用于蒸汽、空气、油、气体和真空应用的两通不锈钢气动调节角阀。标准配置能用丁最高180℃的PEEK的阀芯密封。阀体和阀芯都经过了硬化处理。

斯派莎克PF61G气动角座阀，斯派莎克PF61G带行程开关气动活塞角座阀，斯派莎克气动角座阀价格

Spirax Sarco angle seat valve Introduction in English

    Spirax Sarco ON / OFF pneumatic piston angle boudoir PF61G/PF51G series , durable, compact design , the body is 316L stainless steel / copper. Use PTFE seal to ensure tight shutoff valve head . Self- correction PTFT'V ' type stem seal provides the best sealing effect :

    Stainless steel pneumatic piston valve angle valve also provides welding, such as flanges and sanitary clamp connections . Which PF62G welded connection , PF63G flange connection , (EN1092 PIN or ANSI 150 flanges ), PF64G undertake solder connection , FF65G, ISO2852 sanitary clamp connection .

    Normally open and normally closed for two-way flow of water hammer and special models. There are three different sizes for different applications to perform Used Ding . Other available options include : flow regulator , inductors limit switch , solenoid pilot valve installed directly .

    This series Angle has broad applicability , the use of media , including steam, air neutral gas . Maximum range up 20brad, 180 ℃. Providing an ideal method to switch control equipment manufacturer (OEM) and direct users.

Spirax Sarco adjusting pneumatic Angle PM6, is designed for steam, air , oil, gas and vacuum applied through two stainless steel pneumatic control angle valve . Ding highest standard configuration can spool 180 ℃ of PEEK seal . Body and spool have been hardened .